Fogazzo Iso-Block

Fogazzo Iso-Block is a rigid insulating block that possesses many desirable characteristics for insulating wood fired appliances such as wood fired ovens, or fireplaces. They substantially reduce heat loss and therefore increase efficiency A single layer of Fogazzo Iso-Block at a thickness of 3 inches should be used between the support shelf and floor of every wood fired oven installation. For fireplaces, a layer of Iso-Block can also be added to all exterior walls of the fireplace kit.

Physical Characteristics

Nominal density

Kg/m³

500

Bulk density, dry

Kg/m³

430-450

Compressive strength (EN 1094-5: 1995)

Mpa - lbs/sq.in.

2,5 - 362

Thermal conductivity

W/(m.K)

0,13

Thermal linear expansion coefficient

m/°C

3,2-3,8x10-6

Rate of absorption

Kg/m²/min

2,17

Absorption by immersion (24H)

% by volume

34.7

Maximum service temperature

°C/°F

1100/2012

The data provided here is based on the results of tests conducted under standard procedures and are subject to variation.
The data contained herein is supplied in good faith, for technical reference only and is subject to change without notice.

A single 3” layer of Fogazzo Iso-Block placed between the raised hearth and floor of the fireplace kit as shown here, will increase it’s efficiency.

[Products] [Installation Gallery] [Outdoor Kitchens] [Accessories] [About Us] [Links]

 Copyright © 2002-2005. Fogazzo and the flaming “g” logo are registered trademarks of Fogazzo Wood Fired Ovens and Barbecues, LLC. All Rights reserved.